Menu Close

When laying out fabric which has a nap you should be sure that the nap runs?

What is this? If you’re not sure if your fabric has a nap, run your finger up and down over the fabric. If the fibres smooth down in one direction and feel rough and spiky in the other, your fabric has nap. The smooth direction is referred to as “with the nap” and the rough direction as “against the nap”.

Which way is the nap in fabric?

Put simply, the nap is the texture of the fabric and describes which way the fibres align. You can see the texture of the Liberty cords from Sewbox in the image above. Run your fingers over a corduroy and you can feel which way the fibres go smooth and flat and this is the direction of the nap.

What does with nap mean in fabric?

“With nap” means that you cut all the pattern pieces (even the facing) in the SAME direction, and “without nap” means that you can cut regardless of the direction (just don’t forget to follow the grain line though).

Which way does the nap go on velvet?

There are no hard and fast rules about which way to cut velvet, but typically, velvet garments are cut with the nap going down. Velvet often wears better and mats less when cut with the nap down. However, if you prefer a richer, darker color, cut the garment with the nap going up.

How can you determine the right side of a fabric?

If you look at the top and bottom finished edge of the fabric (this is called the selvage) you’ll notice tiny holes. (These holes are caused by the pins holding the fabric when it’s created in the textile factories.) If you look at the holes and the holes appear neat and smooth, that’s the right side.

What is a nap layout?

A layout “with” nap, indicates that the lower edges of the pieces point to the same end of the fabric. Laying out “with nap” is very important for napped and pile fabrics(for example velvet) and one way prints or designs, so that it can align properly.

Which types of fabrics have a nap?

Napped fabrics include melton, flannel, serge, camel’s hair, sweatshirt fleece, brushed denim, mohair, lamb’s wool and synthetic suedes, just to name a few. Pile fabrics, which require a “with-nap layout,” include velvet, velveteen, corduroy, fleece, terry cloth, fake fur and bouclé amongst others.

Does all fabric have a nap?

What is this? If you’re not sure if your fabric has a nap, run your finger up and down over the fabric. If the fibres smooth down in one direction and feel rough and spiky in the other, your fabric has nap.

What do the terms nap or directional design mean you should do when laying out?

What do the terms nap or directional design mean you should do when laying out? Face the tops of the pattern pieces all in the same direction. What is the difference between lengthwise and crosswise grain?

How do you identify the right side and the wrong side of the fabric?

Right side: When instructions mention the “right side” of fabric, they are talking about the “printed” or “pretty” surface of the fabric. You usually sew things with right sides together so the stitching will be on the inside of the finished project. Wrong side: The other surface is the “wrong” side of the fabric.

How will you distinguish the right side and the wrong side of the fabric?

It’s usually easy to tell the difference between the right and wrong side of a woven fabric with a design or pattern printed on it. The colors on the right side are brighter. The wrong side of the fabric looks like a faded version of the right side. This woven fabric has a pattern printed on it.

Which side of fabric is selvage?

Fabric selvage is the tightly woven edge that runs along each side of a piece of fabric’s lengthwise grain, which is also called the fabric’s warp. Selvage edges can be seen on the edges of quilting fabric that are at the top and bottom of a bolt of fabric.

What does Grainline mean on a sewing pattern?

First let’s define grainline. Grainline is essentially the weave of the fabric: which direction the threads are running. It’s important to understand because how you cut out a garment will change how the finished garment behaves.

What part of fabric do we usually lay out the pattern pieces?

If you are cutting one layer, however, the pattern pieces must be placed printed side up. They must also be placed on the right side of the fabric. Otherwise, you may find that pattern pieces fit the wrong side of your body. Be sure to use the “with nap” layout when working with napped fabrics.

What kind of fold which is folded lengthwise at the center with the selvage?

Lengthwise centerfold– The fabric is folded lengthwise at the center with selvages together. 2. Crosswise centerfold- The fabric is folded crosswise at the center with the raw edges together.

How do you fold fabric lengthwise?


Go all the way across. And then it's as if they've doubled back on themselves on the backside.

What is lengthwise on paper?

: in the direction of the length : longitudinally.

Which of the following is the first step in laying out pattern?

Lay out pattern pieces – focus on 5 areas:

  • Pressing. Press your tissue pattern pieces before you lay them on your fabric. …
  • Pattern Layout Guide. Follow the layout guide that comes with your pattern. …
  • Grainlines. The grainline on your pattern piece is very important. …
  • Cutting. …
  • Marking.


What are the rules in laying out patterns?

RULES TO REMEMBER IN PATTERN LAYOUT

  • Lengthwise centre fold.
  • Off center lengthwise fold:
  • Crosswise center fold.
  • Off Center Crosswise fold.
  • Double fold.
  • Combination fold.
  • Open layout.


How do you lay fabric to cut a pattern?

If a pattern piece has a “place on the fold” line, place that line exactly on the fold of the fabric. Pin the pattern along the fold. Extend pin tips beyond the fold so you don’t accidently cut along the fold of the fabric. Some pattern pieces may need to be placed on the fabric with their printed sides down.

Adblock
detector